WELCOME TO OUR SITE! START SHOPPING!
.png)
Carlyle® Semi-Hermetic Compressor, Series: 06D, 105.8 MBtu/hr Air Cooled, 117.3 MBtu/hr Water Cooled BTU, 5.48 ton at Medium Temperature, 8.81 ton at High Temperature, 1-3/8 in Sweat Suction Line, 1-1/8 in Sweat Discharge Line, 24 cu-ft/min, 208 - 230 VAC, 35.6 A Rated Load, 198 A Locked Rotor, 55.5 A Maximum Continuous, 7-1/2 hp, R-22 Refrigerant, 1750 rev/min Speed, 0 - 50 deg F Suction, 45 deg F at Air Cooled, 40 deg F at Water Cooled Saturated Suction, 130 deg F at Air Cooled, 105 deg F at Water Cooled Saturated Condensing, 24 in L x 16 in W x 15 in H
| Amperage Rating | : | 35.6 A Rated Load, 198 A Locked Rotor, 55.5 A Maximum Continuous |
| BTU Rating | : | 105.8 MBtu/hr Air Cooled, 117.3 MBtu/hr Water Cooled |
| CFM Rating | : | 24 cfm |
| Dimensions | : | 24 in L x 16 in W x 15 in H |
| Discharge Line Size | : | 1-1/8 in Sweat |
| Power Rating | : | 7-1/2 hp |
| Refrigerant Type | : | R-22 |
| Series | : | 06D |
| Speed Rating | : | 1750 rpm |
| Suction Line Size | : | 1-3/8 in Sweat |
| Temperature Rating | : | 0 to 50 deg F Suction, 45 deg F at Air Cooled, 40 deg F at Water Cooled Saturated Suction, 130 deg F at Air Cooled, 105 deg F at Water Cooled Saturated Condensing |
| Tonnage | : | 5.48 ton at Medium Temperature, 8.81 ton at High Temperature |
| Voltage Rating | : | 208 to 230 VAC |
- High-flow, automatically reversible oil pump provides positive displacement oil lubrication
- Crankcase venting system equalizes pressure during start-up and assures oil return to sump
- Oversize sump holds extra oil in crankcase to prevent levels dropping below safe lubrication range during flooded starts
- Contoured pistons lower cylinder clearances to increase compressor capacity and efficiency
- High efficiency valves provide increased refrigerant flow and lower pressure drops
- Electronic oil pressure switch
- No hot gas by-pass unloaders-standard
- Motor variables-two-cylinders: 3 hp, four-cylinders: 20 lb ft, six-cylinders: 24 lb ft
- 6D68-259 crankcase assembly, two-cylinder bore
- Remanufactured service compressor
- Suction service valve variable-motor end location, 2-bolt end cover description, 30 deg orientation
- Internal thermostat variable for A, C and E
- XL-start only
- Future design-original design air conditioning and refrigeration
- Packaging variation-service unit single pack, base unit unpackages
- Six-cylinders
- 8 pt oil charge
- 12.78 in L x 8.88 in W mounting
- 1-1/4 in stroke
Catalog