WELCOME TO OUR SITE! START SHOPPING!
.png)
BELIMO® Damper Actuator, 24 VAC/VDC, 2 - 10 VDC, 50/60 Hz, 3 W Running, 1.5 W Holding, 6 V-A VA, 3 ft 18 AWG Plenum Rated Cable with 1/2 in Conduit Electrical Connection, 150 sec Constant, Independent of Load Motor Running Timing, Zinc-Coated Steel, -30 to 50 deg C Ambient, -40 to 80 deg C Storage, NEMA 2, IP54 Enclosure, 95% RH Non-Condensing Humidity, Proportional Control Signal, Direct Coupled Mounting
| Control Signal | : | Proportional |
| Electrical Connection | : | 3 ft 18 AWG Plenum Rated Cable with 1/2 in Conduit |
| Enclosure Type | : | NEMA 2, IP54 |
| Frequency Rating | : | 50/60 Hz |
| Humidity Rating | : | 95% RH Non-Condensing |
| Material | : | Zinc-Coated Steel |
| Mounting Type | : | Direct Coupled |
| Power Rating | : | 3 W Running, 1.5 W Holding |
| Temperature Rating | : | -30 to 50 deg C Ambient, -40 to 80 deg C Storage |
| Timing Range | : | 150 s Constant, Independent of Load Motor Running |
| VA Rating | : | 6 VA |
| Voltage Rating | : | 24 VAC/VDC, 2 to 10 VDC Control Signal |
- Multi-function technology (configurable), modulating control input
- Electronic throughout 0 - 95 deg rotation overload protection, maximum 95 deg adjustable with mechanical stop angle of rotation
- Reversible with built-in switch motor direction, reversible with clockwise/counter clockwise-mounting fail-safe direction
- Visual indicator, 0 - 95 deg (0 deg is full spring return position)
- Easy to adjust mechanical stop to limit damper rotation
- Check damper position easily with clear position indicator
- Belimo is overload-proof throughout rotation
- Built-in auxiliary switch is easy-to-use, offers feedback or signal for additional device