WELCOME TO OUR SITE! START SHOPPING!
.png)
BELIMO® Damper Actuator, 24 VAC/VDC, 50/60 Hz, 4 W Running, 2 W Holding, 6 V-A VA, 18 AWG Plenum Rated Cable with 1/2 in Conduit Electrical Connection, 150 sec Constant, Independent of Load Motor Running Timing, 40 N-m Torque, 600 ohm Input, -30 to 50 deg C Ambient, -40 to 80 deg C Storage, NEMA 2, IP54 Enclosure, 5 - 95% RH Non-Condensing Humidity, 9.02 in L x 4.55 in W, Proportional, On-Off, Floating Control Signal, Direct Coupled Mounting
| Control Signal | : | Proportional, On-Off, Floating |
| Dimensions | : | 9.02 in L x 4.55 in W |
| Electrical Connection | : | 18 AWG Plenum Rated Cable with 1/2 in Conduit |
| Enclosure Type | : | NEMA 2, IP54 |
| Frequency Rating | : | 50/60 Hz |
| Humidity Rating | : | 5 to 95% RH Non-Condensing |
| Input Impedance | : | 600 Ohm |
| Mounting Type | : | Direct Coupled |
| Power Rating | : | 4 W Running, 2 W Holding |
| Temperature Rating | : | -30 to 50 deg C Ambient, -40 to 80 deg C Storage |
| Timing Range | : | 150 s Constant, Independent of Load Motor Running |
| Torque Rating | : | 40 N-m |
| VA Rating | : | 6 VA |
| Voltage Rating | : | 24 VAC/VDC |
- Electronic throughout 0 - 95 deg rotation overload protection, maximum 95 deg adjustable with mechanical stop angle of rotation
- Reversible with built-in switch motor direction of rotation
- Reflective visual indicator (snap-on) position indication
- External push button manual override
- Brushless DC motor for added accuracy and controllability
- Check damper position with clear position indicator
- Enjoy added flexibility with easy mechanical stops to adjust angle of rotation
- Easily accessible manual override button helps you pre-tension damper blades
- Auxiliary switch and feedback potentiometer add-ons-mount directly on clamp
- Added flexibility to select clamp, electrical connection, and running time
Specification Sheet