BELIMO® B220HT731+LRB24-SR 1087691

BELIMO® Characterized Control Valve, B2 Series, 3/4 in Nominal, FNPT Connection, 2-Way Ways/Position, 600 psi Body, 200 psi Close-Off, 7.31 Cv Flow Coefficient (Cv), Stainless Steel Stem, Stainless Steel Ball Trim, Viton O-Ring Stem Packing, ETFE Disc, ETFE Seat, EPDM O-Ring Seat Seal, DZR Brass, Nickel-Plated, 3 ft 18 AWG Plenum Cable with 1/2 in Conduit Connector Electrical Connection, 24 VAC +/-20% at 50/60 Hz, 24 VDC +/-10%, 1.5 W Running, 0.4 W Holding, NEMA 2, IP42 Enclosure, High Temperature Hot Water/Low Pressure Steam, Up to 60% Glycol Service, 60 to 266 deg F Water, 250 deg F Steam, -22 to 122 deg F Ambient, 8.32 in L x 3.78 in W x 6.15 in H

• Non fail safe actuator
• Modulating control
• 75 deg controllable flow range
• A port equal percentage flow characteristics
• 0% leakage
• Electronic throughout 0 to 90 deg rotation overload protection
• 2 to 10 VDC, 4 to 20 mA with ZG-R01 (500 Ohm, 1/4 W resistor) operating range Y
• 100 kOhm for 2 to 10 VDC (0.1 mA), 500 Ohm for 4 to 20 mA input impedance
• 2 to 10 VDC (maximum 0.7 mA) for 95 deg feedback output
• 90 deg angle of rotation
• Reversible with built-in switch direction of rotation (motor) and reversible with CW/CCW-mounting direction of rotation (fail safe)
• Position indication integrated into handle
• External pushbutton manual override
• 90 s running time
• Less than 35 dB noise level (motor)

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/BELIMO_B220HT731_LRB24_SR_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/BELIMO_B220HT731_LRB24_SR_Specification_Sheet.pdf