WELCOME TO OUR SITE! START SHOPPING!
.png)
Belimo's unique characterized control valve (CCV) is very different. A special characterizing disc inside the valve gives it an equal percentage characteristic which is comparable with that of a globe valve of the same nominal size. The flow (the Cv value) is reduced to the required value by a combination of the hole in the ball and the shaped aperture in the disc. The increase in flow as the valve is opened is very slow and controlled.
BELIMO® Characterized Control Valve, 1/2 in Nominal, FNPT Connection, 2-Way Ways/Position, 600, 200 psi, 1.9 Cv Flow Coefficient (Cv), Stainless Steel Stem, Stainless Steel Trim, EPDM Packing, PTFE Seat, EPDM Seal, Forged Brass, Nickel-Plated, Non-Spring Return Actuator, 3-Point, Floating Control, 3 ft 18 AWG Appliance Cable with 1/2 in Conduit Connector Electrical Connection, 100 to 240 VAC, 50/60 Hz, 4 VA, NEMA 2, IP54 Enclosure, Maintenance-Free Service, 2, 0.5 W Power Consumption, 90 s Run Time, 0 to 250 deg F, 2.41 in L
| Actuator Type | : | Non-Spring Return |
| Connection Type | : | FNPT |
| Control Type | : | 3-Point, Floating |
| Dimensions | : | 2.41 in L |
| Electrical Connection | : | 3 ft 18 AWG Appliance Cable with 1/2 in Conduit Connector |
| Enclosure Type | : | NEMA 2, IP54 |
| Finish | : | Nickel-Plated |
| Flow Coefficient (Cv) | : | 1.9 Cv |
| Frequency Rating | : | 50/60 Hz |
| Material | : | Forged Brass |
| Nominal Size | : | 1/2 in |
| Number of Ways/Position | : | 2-Way |
| Packing Material | : | EPDM |
| Power Consumption | : | 2, 0.5 W |
| Power Rating | : | 4 VA |
| Pressure Rating | : | 600, 200 psi |
| Run Time | : | 90 s |
| Seal Material | : | EPDM |
| Seat Material | : | PTFE |
| Service Type | : | Maintenance-Free |
| Stem Material | : | Stainless Steel |
| Temperature Rating | : | 0 to 250 deg F |
| Trim Material | : | Stainless Steel |
| Voltage Rating | : | 100 to 240 VAC |
- VAV box reheat coils and bypass loops
- This valve is suitable for use in a hydronic system with variable flow
- Equal percentage flow characteristics
- A port as stated in chart B-port 70% of a to AB Cv flow rating
- 75 deg controllable flow range
- 0% for a to AB leakage
- The need for multiple pipe reduction is usually eliminated
- Better control prevents hunting of the control loop, increasing life span of actuator and valve
- Thermal isolating adapter between flange and actuator
- Easy direct coupling of actuator with a single screw
- Perpendicular-mounting flange and square drive head eliminate lateral forces on the stem
- Blowout-proof stem with thrust bearing PTFE disc and double O-ring design for long service life
- Non-corroding chrome-plated brass or stainless ball
- Vent holes reduce condensation build-up
- Forged brass valve body no pin hole leaks
- Characterizing disc made of Teflon® known for excellent strength and chemical resistance
- PTFE seats with O-rings provide constant seating force against the ball and reduce torque requirement
- Actuator can be mounted in four different positions
- Chilled or hot water, up to 60% glycol fluid
- External pushbutton manual override
Instruction/Installation Manual
Video Link