WELCOME TO OUR SITE! START SHOPPING!
.png)
BELIMO® Damper Actuator, 24 VAC/VDC, 50/60 Hz, 5.5 W Operation, 3 W Rest Position, 8.5 V-A VA, 3 ft, 18 ga Plenum Rated Cable with 1/2 in Conduit Connector Electrical Connection, 95 sec Timing, Zinc-Coated Metal and Plastic Casing, 180 in-lb Torque, 100 kohm for 2 - 10 VDC , 500 ohm for 4 - 20 mA Input, Less Than or Equal to 40 dBA Motor, Less Than 62 dBA Fail-Safe, -22 to 122 deg F Ambient, -40 to 176 deg F Storage, NEMA 2, IP54 Enclosure, 95% RH Non-Condensing Humidity, 3.42 in L x 9.69 in H, Modulating Control Signal
| Control Signal | : | Modulating |
| Dimensions | : | 3.42 in L x 9.69 in H |
| Electrical Connection | : | 3 ft, 18 ga Plenum Rated Cable with 1/2 in Conduit Connector |
| Enclosure Type | : | NEMA 2, IP54 |
| Frequency Rating | : | 50/60 Hz |
| Humidity Rating | : | 95% RH Non-Condensing |
| Input Impedance | : | 100 kOhm for 2 to 10 VDC, 500 Ohm for 4 to 20 mA |
| Material | : | Zinc-Coated Metal and Plastic Casing |
| Noise Level | : | <=40 dBA Motor, <62 dBA Fail-Safe |
| Power Rating | : | 5.5 W Operation, 3 W Rest Position |
| Temperature Rating | : | -22 to 122 deg F Ambient, -40 to 176 deg F Storage |
| Timing Range | : | 95 s |
| Torque Rating | : | 180 in-lb |
| VA Rating | : | 8.5 VA |
| Voltage Rating | : | 24 VAC/VDC |
- Reversible with built-in switch direction of rotation (motor)
- Reversible with CW/CCW-mounting direction of rotation (fail-safe)
- 1/2 - 1.05 in round, centers on 1/2 and 3/4 in with insert, 1.05 in without insert shaft diameter
- Actuators are double insulated electrical protection
- Electronic throughout 0 - 95 deg rotation overload protection
- 5 mm hex crank (3/16 in Allen), supplied manual override
- UL enclosure type 2
Specification Sheet