WELCOME TO OUR SITE! START SHOPPING!
.png)
The most reliable steam trap known the inverted bucket provides efficient condensate drainage of virtually all types of steam-using equipment. Put the inverted bucket to work in a tough cast iron package and you have the best of both worlds. Because they operate efficiently for longer periods of time, Armstrong cast iron inverted buckets add solid energy savings to lower replacement/labor costs. All Armstrong cast iron inverted bucket steam traps are repairable for even bigger maintenance savings. A unique leverage system multiplies the force provided by the bucket to open the valve against system pressure. The mechanism is free-floating and has no fixed pivots to create wear or friction. Because the mechanism is located at the top of the trap, no dirt can collect on the orifice. Small particles of dirt are held in suspension until discharged by the full differential purging action when the bucket sinks, pulling the valve off the seat. The discharge orifice is surrounded by a water seal, preventing live steam loss. Automatic air venting is provided by a small vent hole in the bucket, which provides continuous automatic air and CO2 venting at steam temperature. Inverted bucket traps drain continuously, although discharging intermittently, allowing no condensate backup. They are also resistant to water hammer.
ARMSTRONG AIR® Steam Trap, Series: 800, 680 lb/hr Capacity, 3/4 in NPT Connection, 125 lb/sq-in, 250 lbf/sq-in Maximum Allowable Pressure, 450 deg F at 250 lbf/sq-in, Cast Iron Body, ASTM A-48 Class 30, 5 in W x 5-7/16 in H
| Capacity | : | 680 lb/hr |
| Connection Type | : | 3/4 in NPT |
| Dimensions | : | 5 in W x 5-7/16 in H |
| Material Standard | : | ASTM A-48 Class 30 |
| Material | : | Cast Iron Body |
| Pressure Rating | : | 125 lb/sq-in, 250 lbf/sq-in Maximum Allowable |
| Series | : | 800 |
| Temperature Rating | : | 450 deg F at 250 lbf/sq-in |
- This configuration allows steam to enter from the bottom of the trap and the condensate to discharge from the top of the trap
- Inverted bucket traps are a simple leverage system that uses the weight of the bucket to open the valve against pressure
- Inverted bucket traps have a high-resistance to wear, corrosion and hydronic shock
- The traps are designed for service on heat exchange equipment where there is a need to vent air and non-condensable gases quickly
- They are a good choice for their ability to purge air, handle dirt, performance under light loads and operate against back pressure
- 304 all stainless steel internals
- 17-4PH hardened chrome steel valve and seat
- Carbon steel test plug
Specification Sheet