WELCOME TO OUR SITE! START SHOPPING!
.png)
FHS pumps are small, low-priced condensate units for pumping water at temperatures up 200 deg F. Standard 3/16 in thick, black steel receivers are provided for years of reliable service. Units are floor-mounted and designed for up to 20000 sq-ft EDR and discharge pressures up to 20 lbf/sq-in (1.4 bar). Units are available in either simplex or duplex configurations with 3500 rev/min, 1-phase motors. Pumps are typically equipped with mechanical seals rated for temperatures up to 250 deg F. Seals for higher temperatures and special faces are available upon request.
ARMSTRONG AIR® Condensate Pump, Series: 4100 Series, 115 V, 1/3 hp HP Rating, 60 Hz, 3450 rpm Speed Rating, 1 ph, 12 gpm, 8 gal Tank, 3/4 in, Threaded, 20 psi, 250 deg F, Steel
| Connection Size | : | 3/4 in |
| Connection Type | : | Threaded |
| Flow Rate | : | 12 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/3 hp |
| Material | : | Steel |
| Phase | : | 1 ph |
| Pressure Rating | : | 20 psi |
| Series | : | 4100 Series |
| Speed Rating | : | 3450 rpm |
| Tank Size | : | 8 gal |
| Temperature Rating | : | 250 deg F |
| Voltage Rating | : | 115 V |
- Heavy-duty, ball bearing, close coupled pump motors with stainless steel shaft
- 3450 rev/min for greater efficiency and more economical operation
- Level controls with two-pole, drip-proof case, stainless steel float and float rod, double break silver-to-silver contacts
- Float travel adjustment is easy, visible and accessible
- Pump mounting design provides efficient operation and extended life by venting air and flushing seal area
- Offers a wide range of pressures and GPM, unique design for easy maintenance
- Pumps made of durable cast-iron for extended life, efficient design provides maximum capacity with minimum motor load
- The ultimate in ceramic technology for extended life
- The seal runs on the brass impeller hub with the motor shaft actually outside the pump body
- Therefore, the shaft is not exposed to corrosion by condensate
Catalog