WELCOME TO OUR SITE! START SHOPPING!
.png)
Appleton™ Conduit Sealing Fitting, 1/2 in Hub, Female, Male, 1.06 in Turning Radius, Aluminum, Epoxy Powder-Coated, For Use With: Threaded Rigid Metal Conduits and IMC, 1.19 in Dia, 4.72 in Length
| Diameter | : | 1.19 in |
| Finish | : | Epoxy Powder-Coated |
| Hub Size | : | 1/2 in |
| Hub Type | : | Female, Male |
| Length | : | 4.72 in |
| Material | : | Aluminum |
| Suitable For Use With | : | Threaded Rigid Metal Conduits and IMC |
| Turning Radius | : | 1.06 in |
- Explosion-proof, dust ignition-proof, raintight
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Prevent pressure piling within conduit system
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Close radius type for sealing vertical or horizontal conduit runs
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit
- Seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
Catalog