WELCOME TO OUR SITE! START SHOPPING!
.png)
AIRQUEST® Single Package Rooftop Gas Heat/Electric Cooling Unit, Series: RGH, 97000 Btu/hr Cooling, 125000 - 224000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 41 A, 8.1 kW, 1/4 hp, 690 - 936 rev/min Evaporator, 1100 rev/min Condenser, 60 Hz, 3 -Phase, Scroll Compressor, Configuration: Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in, 13 IEER Rating, 12 EER, 8.5 ton, 2 Cool -Stage, R-410A Refrigerant, 82 dBA Decibel Rating, Direct Spark Ignition Ignition, Belt Drive, 3/4 in Condensate Drain Connection, Steel, Galvanized, Baked Enamel-Coated, 40 - 75 deg F, 88-1/8 in L x 59-1/2 in W x 49-3/8 in H
| Amperage Rating | : | 41 A |
| Compressor Type | : | Scroll |
| Configuration | : | Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in |
| Connection Type | : | 3/4 in Condensate Drain |
| Decibel Rating | : | 82 dBA |
| Dimensions | : | 88-1/8 in L x 59-1/2 in W x 49-3/8 in H |
| Drive Type | : | Belt |
| EER Rating | : | 12 |
| Finish | : | Galvanized, Baked Enamel-Coated |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/4 hp |
| IEER Rating | : | 13 |
| Ignition Type | : | Direct Spark Ignition |
| Input BTU Rating | : | 97000 Btu/hr Cooling, 125000 - 224000 Btu/hr Heating |
| Material | : | Steel |
| Number of Stages | : | 2 Cool |
| Phase | : | 3 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 690 - 936 rev/min Evaporator, 1100 rev/min Condenser |
| Series | : | RGH |
| Temperature Rating | : | 40 - 75 deg F |
| Tonnage | : | 8.5 ton |
| Voltage Rating | : | 208 - 230 VAC |
| Wattage | : | 8.1 kW |
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
- Gas efficiencies upto 82%
- Induced draft combustion
- Redundant gas valve with one or two-stage of heating pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- TXV refrigerant metering device on each circuit, exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- Cooling operating range from 35 deg F upto 125 deg F
- Access panels with easy grip handles and no-strip screw feature
- 2 in disposable return air filters
- Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Scroll compressors with internal line break overload protection
- 24 V control circuit protected with resettable circuit breaker
- Permanently lubricated evaporator fan motor and permanently lubricated, totally enclosed, shaft down condenser motors
- Low pressure, freeze protection and high pressure switches
- 10 years limited warranty on aluminized heat exchanger, five-years compressor limited and one-year parts limited warranty
- Dual compressors
- Aluminum/copper condenser and evaporator coil
- Standard one-speed indoor fan motor for W7212 controls
- 82% thermal efficiency
Instruction/Installation Manual