WELCOME TO OUR SITE! START SHOPPING!

AIRQUEST® N8MXL1352420A 1061730
  1. pin-int

AIRQUEST® N8MXL1352420A 1061730

AIRQUEST® N8MXL1352420A Gas Furnace, 132000 Btu/hr Input BTU, 115 VAC, 2000 cu-ft/min, 3/4 hp at 1050 rev/min, 80% AFUE

  • Manufacturer: Carrier
  • Brand Name: AIRQUEST®
  • Part Number: 1061730
  • MPN: N8MXL1352420A
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

AIRQUEST® Gas Furnace, N8MXL Model, 132000 Btu/hr Input BTU Rating, 115 VAC, 10.7 A Maximum, 14 A Unit, 2000 cu-ft/min, 3/4 hp at 1050 rev/min, 80% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, SPST, 1/2 in NPT Connection, Natural Gas Fuel, 6 -Burner, 11 in W x 11 in Dia Blower Size, 24-1/2 in W x 33-1/3 in H x 29 in D Cabinet Dimensions, 40 V-A at 24 VAC Transformer, Steel, 40 - 70 deg F Rise

AFUE Rating      :      80 %
Amperage Rating      :      10.7 A Maximum, 14 A Unit
Blower Size      :      11 in Dia x 11 in W
CFM Rating      :      2000 cfm
Cabinet Dimensions      :      24-1/2 in W x 29 in D x 33-1/3 in H
Configuration      :      Multi-Position, SPST
Connection Type      :      1/2 in NPT
Frequency Rating      :      60 Hz
Fuel Type      :      Natural Gas
HP Rating      :      3/4 hp at 1050 rpm
Input BTU Rating      :      132000 Btu/hr
Material      :      Steel
Model      :      N8MXL
Number of Burners      :      6
Phase      :      1 ph
Temperature Rise      :      40 to 70 deg F
Transformer Rating      :      40 VA at 24 VAC
Voltage Rating      :      115 VAC
  • Flame roll-out sensors standard
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • Certified to leak 2% or less of nominal air conditioning cu-ft/min delivered when pressurized to 1 in water gauge with all present air inlets, air outlets and condensate drain port(s) sealed
  • Tougher - ECM blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, one-piece pre-printed steel cabinet
  • Quieter in shot burners, insulated blower compartment
  • Innovative knobs for easy door removal and secure attachment
  • Through the casing flue pipe for counterflow or horizontal applications with accessory
  • Four position upflow/down flow/horizontal installation
  • Three position inducer elbow capability
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
  • ECM blower motor
  • 4.5 - 13.6 in WC inlet gas pressure
  • Low NOx