WELCOME TO OUR SITE! START SHOPPING!
.png)
Suspender® threaded rod anchors are a next step in the evolution of threaded rod anchoring. These one-piece anchors feature heads that are both end tapped and cross tapped to permit both inline mounting and side mounting of threaded rod systems, eye rings and more. Suspender anchors feature a universal driver (socket or sleeve) to drive all anchor sizes. The Suspender drive sleeve eases switching between drilling and driving in concrete applications. However, only the suspender drive socket is needed with the self-drilling anchors for wood and steel or in pre-drilled applications. This new system allows you to consolidate your inventory to complete a project and reduces down time required to retrieve the correct part.
DeWALT® Suspender® Rod Hanging Anchor, System of Measurement: Imperial, 1/4-20 Screw, 1-1/2 in Screw Thread Length, Carbon Steel, Zinc-Plated, Applicable Materials: Steel, Additional Information: 3/8 in Rod, #3 Size Nut, 0.06 to 0.188 in THK Dimensions, 16 ga Gauge, Vertical/Horizontal-Mounted
| Additional Information | : | 3/8 in Rod, #3 Size Nut, 0.06 to 0.188 in THK Dimensions, 16 ga Gauge, Vertical/Horizontal-Mounted |
| Applicable Materials | : | Steel |
| Finish | : | Zinc-Plated |
| Material | : | Carbon Steel |
| Screw Size | : | 1/4-20 |
| Screw Thread Length | : | 1-1/2 in |
| System of Measurement | : | Imperial |
- Ease and speed of overhead installation
- Lower in place cost, when compared to beam clamps, lag bolts and drop-ins
- Solid, one-piece, cold formed and machined anchor
- New head-style is both end and cross drilled to accept vertical (inline) and horizontal (side-mount) applications
- Entire system requires only one-driver
- 3/8 to 1/2 in thread adapter allows installation of 1/2-13 threaded rod components
Specification Sheet