RUUD® RHCLA2120DBR 1041385

Rheem® commercial air handlers bring a higher level of comfort to your business while keeping utility bills low. Our versatile, low profile design accommodates a variety of business needs, including cooling only operation or both cooling and heating, as well as horizontal or vertical installation. Plus, the insulated cabinet reduces motor noise for quiet operation.

RUUD® Commercial Air Handler, Series RHCLA Series, 10 ton Capacity, Cooling Capacity: 120000 Btu/hr, 120000 Btu/hr BTU, 460/480 V, 3 A, 26.4 kW, 2 hp, 60 Hz, 3 ph, 1750 rpm, 4000 cfm CFM, NPT Female Connection, R-410, 15 A, 3/4 in Connection, Liquid Line Size: 5/8 in, Suction Line Size: 1-3/8 in, Filter Size: (4) 16 x 25 x 1 in, 2 -Stage, 2 Speed, 450 psig Coil Pressure, 18 ga Sheet Metal, Galvanized, 59-1/2 in L x 34-1/4 in H, 10.2 sq-ft Coil Face Area, 3/8 in Dia Coil Tube, 12 in Dia x 12 in W Blower Size, Belt VFD Low Static Drive Package, Direct Expansion, Horizontal/Vertical, 347 lb Weight

• The pre-painted, sheet metal cabinet uses 18 ga material for structural components with an underlying coat of G60 electro deposition powder-coating that is tested to withstand a rigorous 500 hr salt spray test, per ASTM B117
• Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
• Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work
• 1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters
• Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
• All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
• Provides two-stage airflow for improved part load efficiency, Meets California Title 24 requirements
• Field piping connections are made through a fixed post between two side access panels on either side of the unit
• Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete
• Units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
• The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
• Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
• Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
• All Models are designed for either application and can be installed in either position as supplied from the factory

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/RUUD_RHCLA2090CBR_Specification_Sheet.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/RUUD_RHCLA2090CBR_Warranty_Information.pdf