WELCOME TO OUR SITE! START SHOPPING!
.png)
Rheem®_DEL_2024_MAR_19_11_57_08 E12A-9-G-240 1057990
Rheem® PowerPack Series E12A-9-G-240 Electric Water Heater, 12 gal, 30709 Btu/hr, 9 kW, 3 ph, 240 V
- Manufacturer: Rheem Manufacturing_DEL_2024_MAR_19_11_56_58
- Brand Name: Rheem®_DEL_2024_MAR_19_11_57_08
- Part Number: 1057990
- MPN: E12A-9-G-240
- Min. Order Qty: 1
- Qty. Interval: 1 Sign In for Availability
-
Price:
Rheem® Electric Water Heater, PowerPack Series, Model: E, 12 gal Capacity, 30709 Btu/hr, 9 kW, 93 gph Recovery Rate, 98 % Efficiency, 3 Elements, 3000 W Element Wattage, 22 A, 240 V, 3 ph Phase, NPT Connection, 3/4 in Connection, 160 psi, Class G Fuse, 3 A Fuse, 10 AWG Wire, Immersion Thermostat, Steel, 90 to 190 deg F, 28-1/2 in H x 19 in W x 24-1/4 in D
| Amperage Rating | : | 22 A |
| BTU Rating | : | 30709 Btu/hr |
| Capacity | : | 12 gal |
| Connection Size | : | 3/4 in |
| Connection Type | : | NPT |
| Dimensions | : | 28-1/2 in H x 19 in W x 24-1/4 in D |
| Efficiency | : | 98 % |
| Element Wattage | : | 3000 W |
| Fuse Size | : | 3 A |
| Fuse Type | : | Class G |
| Material | : | Steel |
| Model | : | E |
| Number of Elements | : | 3 |
| Phase | : | 3 ph |
| Power Rating | : | 9 kW |
| Pressure Rating | : | 160 psi |
| Recovery Rate | : | 93 gph |
| Series | : | PowerPack Series |
| Temperature Rating | : | 90 to 190 deg F |
| Thermostat Type | : | Immersion |
| Voltage Rating | : | 240 V |
| Wire Size | : | 10 AWG |
- PowerPack ASME Series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use
- Installs close to fixtures, eliminating the wait for hot water
- Long life ASME tank design, proprietary steel formulation with high-temperature porcelain enamel maximizes corrosion-resistant
- Lifeguard™ heating elements, resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of incoloy 840, which surrounds the NiChrome wire filament
- Water connections hot outlet and cold inlet are 3/4 in NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
- 98% maximum recovery efficiency
- Minimal heat loss, majority of the tank surface area is insulated with 2-1/2 in rigid polyurethane foam insulation
- Exclusive diagnostic system with glowing LEDs that verify heating element operation
- LED's pin point the exact location of functioning or non-functioning heating elements
- Integral fusing on each element
- Two magnesium anode rods for long life and corrosion-resistant
- Full-flow, full-port, brass drain valve
- Temperature and pressure relief valve, factory installed
- Electrical connections pre-wired, accessible control box with multiple knockouts on side in size selections to match the national electric code
- A grounding screw is provided for attaching an equipment grounding conductor
- Single panel control box with hinged door provides immediate access to all electrical components and elements
- Terminal block all model are equipped with UL listed terminal blocks for simplicity of installation
- The terminal block will accept either copper or aluminum field connect wire
Owners/User Manual
