DeWALT® 02840-PWR 1018237

The Zamac Hammer-Screw™ is a unique, one step nail drive anchor featuring a phillips type head and a screw thread for use in concrete, block, brick or stone. It is available in 1/4 in diameter and lengths ranging from 3/4 to 3 in. With a body formed from corrosion resistant Zamac alloy and a zinc-plated carbon steel drive screw, this anchor has been developed as an improvement over standard nailin anchors. The zamac hammer screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete. The anchor is not recommended for overhead, life safety or sustained tensile loading applications.

DeWALT® Nail Anchor, 1/4 in Diameter, 1 in Length, 1/4 in Drill, 5/16 in Maximum Work Thickness, 1-1/8 in Minimum Embedment, 35/64 in Dia x 9/64 in H Head, Mushroom Head, 1018 Grade, 1290 lb Shear Strength, Tension Strength: 1090 lb, Zamac Alloy Steel, Finish: Zinc-Plated

• General-purpose anchoring
• Installs in a variety of base materials
• Removable anchor screw can be backed out with a phillips head driver

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/DeWALT_02840_PWR_Specification_Sheet.pdf